Join our mailing list!





You are here: Home > Range & Indicator Rods
Sort By:
Page of 1
17cal Range Rod 20cal Range Rod
17cal Range Rod
Rental Price $12.00
20cal Range Rod
Rental Price $12.00
Notes:
  • Rods have a removable pilot and are made of steel.
  • This Range rod is tapered so that when inserted into a non-chambered barrel blank, a small section of the rod will protrude from the bore. The rod will be aligned with the center of the bore due to the pilot and the rod's taper (near the end of the rod opposite the pilot). The rod can then be used as an index point to assure that the blank is centered in a lathe prior to any machining operations.
  • If using a pre-chambered barrel, a PTG Indicator Rod will work better, since the taper in that rod is much closer to the pilot (the rod will center in the throat area of the chamber and still protrude from the barrel at the breech.
  • Range Rod: new, unchambered barrel blank
  • Indicator Rod: barrel that has been chambered
  • Notes:
  • Rods have a removable pilot and are made of steel.
  • This Range rod is tapered so that when inserted into a non-chambered barrel blank, a small section of the rod will protrude from the bore. The rod will be aligned with the center of the bore due to the pilot and the rod's taper (near the end of the rod opposite the pilot). The rod can then be used as an index point to assure that the blank is centered in a lathe prior to any machining operations.
  • If using a pre-chambered barrel, a PTG Indicator Rod will work better, since the taper in that rod is much closer to the pilot (the rod will center in the throat area of the chamber and still protrude from the barrel at the breech.
  • Range Rod: new, unchambered barrel blank
  • Indicator Rod: barrel that has been chambered
  • 22rf Range Rod 25cal Range Rod
    22rf Range Rod
    Rental Price $12.00
    25cal Range Rod
    Rental Price $12.00
    Notes:
  • Rods have a removable pilot and are made of steel.
  • This Range rod is tapered so that when inserted into a non-chambered barrel blank, a small section of the rod will protrude from the bore. The rod will be aligned with the center of the bore due to the pilot and the rod's taper (near the end of the rod opposite the pilot). The rod can then be used as an index point to assure that the blank is centered in a lathe prior to any machining operations.
  • If using a pre-chambered barrel, a PTG Indicator Rod will work better, since the taper in that rod is much closer to the pilot (the rod will center in the throat area of the chamber and still protrude from the barrel at the breech.
  • Range Rod: new, unchambered barrel blank
  • Indicator Rod: barrel that has been chambered
  • Notes:
  • Rods have a removable pilot and are made of steel.
  • This Range rod is tapered so that when inserted into a non-chambered barrel blank, a small section of the rod will protrude from the bore. The rod will be aligned with the center of the bore due to the pilot and the rod's taper (near the end of the rod opposite the pilot). The rod can then be used as an index point to assure that the blank is centered in a lathe prior to any machining operations.
  • If using a pre-chambered barrel, a PTG Indicator Rod will work better, since the taper in that rod is much closer to the pilot (the rod will center in the throat area of the chamber and still protrude from the barrel at the breech.
  • Range Rod: new, unchambered barrel blank
  • Indicator Rod: barrel that has been chambered
  • 270 Indicator Rod 270 Range Rod
    270 Indicator Rod
    Rental Price $12.00
    270 Range Rod
    Rental Price $12.00
    Rods have a removable pilot and are made of steel. This
  • Indicator Rod is tapered so that when inserted into a chambered barrel , a small section of the rod will protrude from the bore.
  • The rod will be aligned with the center of the bore due to the pilot and the rod's taper (near the end of the rod opposite the pilot).
  • I The rod can then be used as an index point to assure that the blank is centered in a lathe prior to any machining operations.
  • If using a pre-chambered barrel, a PTG Indicator Rod will work better, since the taper in that rod is much closer to the pilot (the rod will center in the throat area of the chamber and still protrude from the barrel at the breech.
  • Range Rod: new, unchambered barrel blank
  • Indicator Rod: barrel that has been chambered
  • Notes:
  • Rods have a removable pilot and are made of steel.
  • This Range rod is tapered so that when inserted into a non-chambered barrel blank, a small section of the rod will protrude from the bore. The rod will be aligned with the center of the bore due to the pilot and the rod's taper (near the end of the rod opposite the pilot). The rod can then be used as an index point to assure that the blank is centered in a lathe prior to any machining operations.
  • If using a pre-chambered barrel, a PTG Indicator Rod will work better, since the taper in that rod is much closer to the pilot (the rod will center in the throat area of the chamber and still protrude from the barrel at the breech.
  • Range Rod: new, unchambered barrel blank
  • Indicator Rod: barrel that has been chambered
  • 30cal Indicator Rod 30cal Range Rod
    30cal Indicator Rod
    Rental Price $12.00
    30cal Range Rod
    Rental Price $12.00
    Rods have a removable pilot and are made of steel. This
  • Indicator Rod is tapered so that when inserted into a chambered barrel , a small section of the rod will protrude from the bore.
  • The rod will be aligned with the center of the bore due to the pilot and the rod's taper (near the end of the rod opposite the pilot).
  • I The rod can then be used as an index point to assure that the blank is centered in a lathe prior to any machining operations.
  • If using a pre-chambered barrel, a PTG Indicator Rod will work better, since the taper in that rod is much closer to the pilot (the rod will center in the throat area of the chamber and still protrude from the barrel at the breech.
  • Range Rod: new, unchambered barrel blank
  • Indicator Rod: barrel that has been chambered
  • Notes:
  • Rods have a removable pilot and are made of steel.
  • This Range rod is tapered so that when inserted into a non-chambered barrel blank, a small section of the rod will protrude from the bore. The rod will be aligned with the center of the bore due to the pilot and the rod's taper (near the end of the rod opposite the pilot). The rod can then be used as an index point to assure that the blank is centered in a lathe prior to any machining operations.
  • If using a pre-chambered barrel, a PTG Indicator Rod will work better, since the taper in that rod is much closer to the pilot (the rod will center in the throat area of the chamber and still protrude from the barrel at the breech.
  • Range Rod: new, unchambered barrel blank
  • Indicator Rod: barrel that has been chambered
  • 338 Range Rod 358 Indicator Rod
    338 Range Rod
    Rental Price $12.00
    358 Indicator Rod
    Rental Price $12.00
    Notes:
  • Rods have a removable pilot and are made of steel.
  • This Range rod is tapered so that when inserted into a non-chambered barrel blank, a small section of the rod will protrude from the bore. The rod will be aligned with the center of the bore due to the pilot and the rod's taper (near the end of the rod opposite the pilot). The rod can then be used as an index point to assure that the blank is centered in a lathe prior to any machining operations.
  • If using a pre-chambered barrel, a PTG Indicator Rod will work better, since the taper in that rod is much closer to the pilot (the rod will center in the throat area of the chamber and still protrude from the barrel at the breech.
  • Range Rod: new, unchambered barrel blank
  • Indicator Rod: barrel that has been chambered
  • Rods have a removable pilot and are made of steel. This
  • Indicator Rod is tapered so that when inserted into a chambered barrel , a small section of the rod will protrude from the bore.
  • The rod will be aligned with the center of the bore due to the pilot and the rod's taper (near the end of the rod opposite the pilot).
  • I The rod can then be used as an index point to assure that the blank is centered in a lathe prior to any machining operations.
  • If using a pre-chambered barrel, a PTG Indicator Rod will work better, since the taper in that rod is much closer to the pilot (the rod will center in the throat area of the chamber and still protrude from the barrel at the breech.
  • Range Rod: new, unchambered barrel blank
  • Indicator Rod: barrel that has been chambered
  • 375 Range Rod 6mm Range Rod
    375 Range Rod
    Rental Price $12.00
    6mm Range Rod
    Rental Price $12.00
    Notes:
  • Rods have a removable pilot and are made of steel.
  • This Range rod is tapered so that when inserted into a non-chambered barrel blank, a small section of the rod will protrude from the bore. The rod will be aligned with the center of the bore due to the pilot and the rod's taper (near the end of the rod opposite the pilot). The rod can then be used as an index point to assure that the blank is centered in a lathe prior to any machining operations.
  • If using a pre-chambered barrel, a PTG Indicator Rod will work better, since the taper in that rod is much closer to the pilot (the rod will center in the throat area of the chamber and still protrude from the barrel at the breech.
  • Range Rod: new, unchambered barrel blank
  • Indicator Rod: barrel that has been chambered
  • Notes:
  • Rods have a removable pilot and are made of steel.
  • This Range rod is tapered so that when inserted into a non-chambered barrel blank, a small section of the rod will protrude from the bore. The rod will be aligned with the center of the bore due to the pilot and the rod's taper (near the end of the rod opposite the pilot). The rod can then be used as an index point to assure that the blank is centered in a lathe prior to any machining operations.
  • If using a pre-chambered barrel, a PTG Indicator Rod will work better, since the taper in that rod is much closer to the pilot (the rod will center in the throat area of the chamber and still protrude from the barrel at the breech.
  • Range Rod: new, unchambered barrel blank
  • Indicator Rod: barrel that has been chambered
  • 7mm Indicator Rod 7mm Range Rod
    7mm Indicator Rod
    Rental Price $12.00
    7mm Range Rod
    Rental Price $12.00
    Rods have a removable pilot and are made of steel. This
  • Indicator Rod is tapered so that when inserted into a chambered barrel , a small section of the rod will protrude from the bore.
  • The rod will be aligned with the center of the bore due to the pilot and the rod's taper (near the end of the rod opposite the pilot).
  • I The rod can then be used as an index point to assure that the blank is centered in a lathe prior to any machining operations.
  • If using a pre-chambered barrel, a PTG Indicator Rod will work better, since the taper in that rod is much closer to the pilot (the rod will center in the throat area of the chamber and still protrude from the barrel at the breech.
  • Range Rod: new, unchambered barrel blank
  • Indicator Rod: barrel that has been chambered
  • Notes:
  • Rods have a removable pilot and are made of steel.
  • This Range rod is tapered so that when inserted into a non-chambered barrel blank, a small section of the rod will protrude from the bore. The rod will be aligned with the center of the bore due to the pilot and the rod's taper (near the end of the rod opposite the pilot). The rod can then be used as an index point to assure that the blank is centered in a lathe prior to any machining operations.
  • If using a pre-chambered barrel, a PTG Indicator Rod will work better, since the taper in that rod is much closer to the pilot (the rod will center in the throat area of the chamber and still protrude from the barrel at the breech.
  • Range Rod: new, unchambered barrel blank
  • Indicator Rod: barrel that has been chambered
  • 338 Indicator Rod
    338 Indicator Rod
    Rental Price $12.00
    Rods have a removable pilot and are made of steel. This
  • Indicator Rod is tapered so that when inserted into a chambered barrel , a small section of the rod will protrude from the bore.
  • The rod will be aligned with the center of the bore due to the pilot and the rod's taper (near the end of the rod opposite the pilot).
  • I The rod can then be used as an index point to assure that the blank is centered in a lathe prior to any machining operations.
  • If using a pre-chambered barrel, a PTG Indicator Rod will work better, since the taper in that rod is much closer to the pilot (the rod will center in the throat area of the chamber and still protrude from the barrel at the breech.
  • Range Rod: new, unchambered barrel blank
  • Indicator Rod: barrel that has been chambered
  •